Lynx L30PSR2 Owner's Manual

20

it’s easy to keep your 

prosear™ burner operating at 

peak performance.  Just run it 

on “hi” with the hood open 

for 5 minutes after each use to 

burn away any food particles 

or drippings. 
any ash accumulation on 

the burner surface can be 

removed with a light brush or 

vacuum … But wait until 

the BuRneR is cool! 

every 3 to 6 months, remove 

the burner (it’s held in place 

by a set-screw) and inspect 

the venturi (inlet) and orifice 

to ensure that they’re  free of 

obstructions. 
food debris on the inside 

of the burner can be gently 

shaken out.  do not touch the 

ceramic surface.  
clean any obstructions with 

a straight piece of metal coat 

hanger, pipe cleaner or paper 

clip.
when re-installing the 

prosear™ burner, be sure to 

correctly position the burner 

and the protective screen.