Lenmar SOLOXP-OC Leaflet

PLEASE READ THE INFORMATION AND FOLLOW ALL INSTRUCTIONS THOROUGHLY 

BEFORE USING THIS PRODUCT.

Thank  you  for  purchasing  the  SoloXP  travel  charger.  The  SoloXP  charger  with  the 

appropriate adapter plate is a fully automatic battery charger which is compatible with 

virtually all 3.6 – 8.4 Volt Lithium-Ion batteries for camcorders and digital cameras 

from  Sony,  Canon,  JVC,  Panasonic,  Nikon,  Kodak,  FujiFilm,  Sharp,  RCA  and  other 

manufacturers. This charger uses a variety of adapter plates to make it compatible with 

existing  batteries  as  well  as  batteries  that  will  be  developed  into  the  future.  Visit 

www.lenmar.com/SoloXP for up to date adapter plate compatibility list.

The  SoloXP  charger  uses  digital  microprocessor  technology  to  provide  a  safe,  full 

charge every time. Charging status is provided by the built-in 2-color LED indicator.  

In addition, the SoloXP has an integrated USB Port so it can also provide the power to 

recharge your PDA, cell phone, MP3 player, handheld game, or any other device that 

can be charged from a USB port (compatible cables not included).

Attach the adapter plate for the specific battery you will be charging. 

To change the adapter  plate you want attached, you will need to remove the adapter 

plate first by pushing down on the plate and applying firm pressure to slide it away to 

the right of the charger base. Then, attach the selected adapter plate to the charger 

unit by placing the adapter plate onto the charger, aligning the pointer on the adapter 

plate to the pointer on the charger base. While pressing down on the adapter plate, 

slide the plate firmly to the left on the charger base until it stops.  

The USB charging port on this unit may be used with any USB compatible device that 

is used with “Charge” or “Charge / Sync” USB cables and will provide power via that 

cable to the device allowing it to charge itself. The USB port is available for use at any 

time while the SoloXP charger is plugged into an AC outlet. While the SoloXP charger 

is plugged into AC power, simply connect your USB cable to your device and then 

plug into the USB port on the side of the SoloXP. At this time the device will indicate 

that it is receiving power and charging its internal battery. 

You  may  simultaneously  charge  your  digital  camera  or  camcorder  while 

powering/charging  another  device  thru  the  USB.  This  will  not  effect  the  battery 

charge time.

• If the LED status indicator does not light up when the charger is plugged into AC 

   power, check to make sure that the AC outlet has power. 

• If the battery is attached, and the status indicator does not show charging, the 

   battery contacts may not be properly connecting to the adapter plate. Unplug the 

   unit and check connection of the battery to the adapter plate.  Also, make sure 

   the adapter plate is the proper one and that it is securely attached to the charger.

• Use a clean dry cloth when necessary to keep the metal contacts of both charger 

   and battery clean.

Input 

 

100-240VAC, 50-60Hz

Output  

 

Charger - 4.2 / 8.4VDC, 400mA max.

 

 

USB – 5.25VDC, 200mA max.

Compatibility: 

3.6 – 8.4 Volt Lithium-Ion (Li-Ion) rechargeable batteries

Charge Indicator: 

Green – Charge complete or no battery installed

 

 

Red - Charging

• For use with 3.6 – 8.4V Lithium-Ion (Li-Ion) batteries ONLY! Use with other type  

   batteries voids warranty, may cause damage to the charger/ battery and possibly 

   cause injury to the user.

• Do not leave a battery connected to the charger when it is not plugged into AC 

   power.

• For best battery life, we suggest recharging Li-Ion batteries after use and before 

   being put away.

• Do not leave the battery connected to the charger for prolonged periods. Remove 

   the battery after charge is complete.

• Unplug the charger from AC power when not in use. 

• Indoor use only. Do not use, place or store the charger where it may come into 

   contact with water or moisture.

• No user serviceable parts, opening chassis will void warranty.

The indicator LED will also be Green if the SoloXP is plugged into AC power without a 

battery installed. Once the charge is complete, we recommend that you unplug the 

charger from AC power and remove the battery from the charger.

Install the battery to be charged onto the adapter plate. Flip down the AC plug on the 

rear of the charger and plug into AC outlet. The LED charge indicator on the top of the 

unit will turn Red to indicate that the battery is being charged. Once the charge is 

complete, the indicator LED will turn Green.  

Approximate charge times are shown below.

This limited warranty starts from the date of original purchase and expires three years 

thereafter.  If,  during  this  period,  any  part,  because  of  manufacturing  defects  or 

workmanship,  fails  to  function  properly  under  normal  use  it  will  be  repaired  at  no 

charge  for  parts  and  labor  or,  at  our  option,  the  product  will  be  replaced.    The 

following is excluded: damages from delay or loss of use of equipment or damaged 

batteries,  malfunctions  resulting  from  misuse,  tampering,  unauthorized  repairs, 

modifications or accident.

Package the unit and its accessories carefully using ample padding material to prevent 

damage in transit and ship it prepaid and insured to:

LENMAR ENTERPRISES, INC. 

4035 Via Pescador

Camarillo, CA  93012 USA

When sending in product for service, your package should include evidence of date 

and place of purchase.  Enclose $10.00 for shipping and handling for addresses in the 

U.S.  and  $15.00  in  Canada.  For  outside  the  U.S.  and  Canada,  freight  will  vary      

depending upon ship-to address.

307-030-CT

Batt. Volt./Capacity

3.6V, 650mAh

3.6V, 1200mAh

7.2V, 650mAh

7.2V, 1200mAh

7.2V, 2400mAh

Max Charge Time*

2 hrs.

4 hrs.

2 hrs.

4 hrs.

8 hrs.

* - All times are approximate and will vary depending on battery condition and level of discharge.