Prestige PLBQ36300 Installation Instruction

- Handling Precautions -

• Remove all rings, watches, belt buckles, jewelry and any clothing with metal buttons or

snaps to prevent damage to hood.

• DO NOT REMOVE HOOD FROM ITS ORIGINAL CARTON UNTIL YOU ARE READY

TO INSTALL IT.

• When you are ready to begin the installation process, remove the hood from its carton

and place it on a clean soft blanket.

• Inspect the hood carefully for any damage or imperfections before you begin to install

the hood. If any damage or imperfections exist, re-carton the hood and call your dealer
IMMEDIATELY, do not install a damaged hood.

• It is highly recommended that rubber gloves be used to prevent scratches on the hood

and to provide you with a firm grip.

•

When removing the hood from the carton locate the filters. The filters are not pre-
installed in the hood. The filters are in a box marked filters, inside the hood
carton.

• PL model hoods can be ducted to the top or the rear. Check product guide for additional

transitions, wall caps and roof caps.

• Duct size for 600CFM blowers is 6" round and an optional transition model TRC8/6

should be used to increase the duct size to 8" round for optimal performance.

• PL3624, PL4224 and PL4824 require the use of transition model TR6x15/10 (NOT

INCLUDED) when using a 1200CFM blower.

• All Prestige® ventilation hoods have a variable speed blower switch as well as a light

dimmer switch. See Blower Installation instructions for further information on your
installation application.

• PC model hoods can be ducted to the rear with the use of a 90º elbow. (NOT

SUPPLIED) Check product guide for additional transitions, wall caps and roof caps.

• PC3024 hoods CANNOT accept the IBPC1200 internal blower.  PC3624 & PC4224

hood's duct size is 10" round when using the IBPC1200 internal blower.

•

All PC and PL hoods can be converted for ductless applications. See product
guide for optional ductless conversion kits.