Viking FDSB5423 Installation Guide

5

WARNING

   TIP OVER HAZARD
  Appliance is top heavy 
and tips easily when not 
completely installed. Keep 
doors closed until appliance 

is completely installed and secured per 
installation instructions.

Use two or more people to move and 
install appliance. Failure to do so can 
result in death or serious injury.

WARNING

  ELECTRICAL SHOCK 
HAZARD
 Disconnect power or turn 
power disconnect switch to 

OFF position before removing top grille. 
Failure to do so can result in death or 
electrical shock.

IMPORTANT – 

Please Read and Follow!

  Most of the unit’s weight is at the top. Extra care is needed when moving the unit to prevent
tipping. Use cardboard shipping material or plywood under unit until it is installed in the 
operating position to protect fl oor surface.

 It is your responsibility to:
•  comply with installation specifi cations and dimensions.
•  properly install unit.
•  remove any moldings or decorative panels that prevent the unit from being serviced.
•  make sure that you have these materials (not provided with your unit), which are necessary
  for proper installation:
   

• 1/4” (6 mm) copper tubing with shutoff valve

   

• 6– #8 x 3” (7.6 cm) wood screws (longer screws may be required)

   

• 1– Saddle valve (do not use self-piercing feature of the valve)

•  assure that fl oor will support unit, door panels and contents (approximately 
  1200 pounds [540 kg]).
•  provide a properly grounded electrical outlet.
•  assure that location will permit appliance doors to open 90º minimum.