Dacor RNR30NS Installation Instruction

To determine if the base plate is high enough:
a.  Determine the location of the range center line and front 

panel when the range is in its final position based on 

the Product Dimensions on page 4 and the actual 

cabinet/cutout dimensions used for the installation.

b.  Determine and mark the required position of the anti-tip 

bracket, based on the diagram below. Push the bracket 

up against the wall in the mounting location.

c.  Using a pencil, make a dot next to the notches on both 

sides of the bracket. Determine if the base plate is as 

high at the notches by drilling test holes into the wall at 

both dots with a 1/16” drill bit. Drill just deep enough to 

see if the bit contacts the base plate. If the bit contacts 

the base plate the location will support wall installation 

of the anti-tip bracket. If you do not contact the base 

plate, or you contact metal stud mounting materials, the 

wall mounting method may not be used and the floor 

mounting method must be suitable, or the wall must be 

modified so that the base plate is above the notches.

4.  To install the bracket, place it against the wall in the mounting 

location shown below. Using a drill with 1/8” diameter drill bit, 

drill four (4) 1 5/8” deep pilot holes perpendicular to the screw 

seating surfaces shown. Attach the bracket to the wall as 

shown with the four (4) included #12 x 1 3/4 screws.

Installation Instructions

Drywall

Notch

Wall

Anti-tip 

bracket

Base 

plate

CL

CL

Range 

center line

#12 x 1 3/4” screw, 

4 places

Range front

panel

Bracket 

center line

Back wall

11 1/2” 

(29.2 cm)

25 1/4” 

(64.1 cm) 

to 

26 1/4 

(66.7 cm)

Cabinet  

face below 

countertop

Top hole, indicates

bracket center line

CL

#8 x 1”,  #8 x 1 1/4” 

or #12 x 1 3/4 screw, 

4 places (see text)

Range front

panel

Range 

center line

2 3/16” 

(5.6 cm)

10 1/2”

(26.3 cm)

21 3/8”

(54.3 cm)

Anchor, 4 places: 

use for concrete  

floor only

Front 

hole

Cabinet  

face below 

countertop

Anti-tip bracket 

front hole locations