Dacor RNR30NS Design Guide
All specifications subject to change without notice.
Phone: (800) 793-0093
www.dacor.com
PLANNING
GUIDE
RNR30NS, RNR30NFS, RNR30NIS, RNR30NIFS
Renaissance
30” Wide
Electric Induction Range
Document # PG05-011
Revised 01/28/15 Page 2/5
Electrical Specifications
NEMA 14-50P PLUG
NEMA 14-50R RECEPTACLE
ELECTRICAL REQUIREMENTS
Electrical Circuit
Required
Total Connected
Load**
240 Vac 60 Hz, 4 wire*,
50 Amp.
11.5 kW (48.0 Amp.)
*Two 120 Vac hot (L1 and L2), one neutral (N1) and one ground.
**This information above is for reference only. If the above data
**This information above is for reference only. If the above data
does not agree with the product data label, use the data on the
product data label.
IMPORTANT: Models with -C option suffix are ranges that
IMPORTANT: Models with -C option suffix are ranges that
come with a factory installed 4-wire appliance cord with NEMA
14-50P plug. For freestanding ranges installed in Canada, a
factory installed 4-wire appliance cord with NEMA 14-50P plug
is required, without modification. For slide-in ranges installed in
Canada and all ranges installed outside of Canada, the 4-wire
appliance cord configuration (-C type) is optional and may be
utilized where local codes permit The plug is designed to plug
directly into a NEMA 14-50R electrical receptacle installed by a
licensed electrician according to the above specifications.
Factory Wiring
Model
Factory Electrical Connection
RNR30NS,
RNR30NFS
Power cord not installed. Not for installation in Canada.
RNR30NS-C,
RNR30NFS-C
Cord connected, for installation in Canada (and U.S.A.,
where local codes permit).
RNR30NIS,
RNR30NIFS
No power cord. May be installed in Canada and U.S.A.
RNR30NIS-C,
RNR30NIFS-C
Cord connected, may be installed in Canada and U.S.A.,
where local codes permit.
Cabinet face
Countertop
Range trim resting
on countertop
RNR30NI[F]S range
3/8” min. (1.0 cm)
flat countertop
overhang
28 5/16” (71.9 cm)
ERV3015
downdraft
3/8” min. (1.0 cm) space
required behind ERV3015
chassis to clear stiffener
ATKR30SR
trim kit
installed
Cabinet face
Countertop
Range trim resting
on countertop
Back of
side panel
rests against
cabinet face
RNR30NI[F]S range
3/8” min. (1.0 cm)
flat countertop
overhang
ATKR30SR
trim kit
installed
28 5/16” (71.9 cm)
3 inch
side panel
ERV3015
downdraft
3/8” min. (1.0 cm) space
required behind ERV3015
chassis to clear stiffener
Product Dimensions (cont.)
SIDE VIEW - DOWNDRAFT ERV3015 WITH SLIDE-IN, SELF-
RIMMING INSTALLATION WITH 3” SIDE PANELS REMOVED
AND ATKR30SR TRIM KIT (REQUIRED) INSTALLED
SIDE VIEW - DOWNDRAFT ERV3015 WITH SLIDE-IN, SELF-
RIMMING INSTALLATION WITH 3” SIDE PANELS INSTALLED
AND ATKR30SR TRIM KIT (REQUIRED) INSTALLED