Gaggenau BS484611 Owner's Manual

With the drying program, you can dry the cooking 
compartment after cleaning or after steaming.

The drying program takes 20 minutes.

Remove accessories from the cooking 
compartment. Wipe out the cooking 
compartment. Thoroughly remove residues of 
cleaner. Close appliance door.

Set the function selector to 

. Select the drying 

program with the rotary selector.

The 

j

 symbol is displayed. Confirm with 

™

.

The drying time of 20  minutes appears. Touch 

I

 to 

start. The drying time elapses on the display. The 
lamp in the cooking compartment stays off.

A signal sounds after 20 minutes. A message 
appears in the display. Confirm with 

™

.

The drying program has ended. Allow the appliance to 
cool down. Then polish the cooking compartment and 
the panel with a soft cloth.

To keep your appliance in good working order, you 
have to descale the cooking compartment regularly. 
Especially the area behind the side plate should be 
descaled regularly. Depending on water hardness and 
frequency of use, you will need to descale your 
appliance more often, especially for appliance 
versions with enameled cooking compartments.

Be careful not to scratch the oven interior when 
removing the side plate. Ensure that no small parts fall 
into the base strainer. Tip: put a kitchen cloth over the 
oven base. 

 

For descaling, use only the liquid descaler 
recommended by after-sales service (order # 667025 
from after-sales service or in the online shop). Other 
descaling agents can cause damage to the appliance.

9

Wipe off descaler immediately with water if it 
reaches the door seal, the front or other 
sensitive surfaces.

9

Do not use harsh or abrasive cleaning agents or 
objects for descaling. 

‒

: 

clean and descale the cooking compartment each 
time you change the filter cartridge. If it is not 
necessary to descale the cooking compartment, 
clean it with the oven interior care agent.

‒

We recommend, in combination with the descaler, 
our oven interior care agent for stainless-steel 
care and to neutralize descaler residues (order # 
667027 from after-sales service or in the online 
shop). It contains a care agent, a soft non-scratch 
sponge and a lint-free cloth.

Set the function selector to 

. Select the 

descaling program with the rotary selector.

The 

‘

 symbol is displayed. Confirm with 

™

. 

Follow the instructions that are shown in the 
display.

To remove the side plate detach the left slide-in 
rails (see section entitled 

). 

Detach the grease filter in the upward direction. 
Undo the forward bolt with a socket wrench 
(SW 13). Remove the side plate. Confirm with 

™

.

Place the side plate separately in the sink and 
spray on descaler Leave to act for a few minutes. 
Rinse thoroughly with plenty of water.

9

Do not let the descaling solution come into 
contact with surfaces that are sensitive to 
acid (e.g. marble worktops)!

Spray descaler onto the areas in the cooking 
compartment where limescale has developed and 
leave to act for 1 - 3 minutes. Confirm with 

™

.

Repeat the descaling process if necessary.

Thoroughly rinse off the descaler. Be sure to 
clean the door seal again with a clean, damp 

'U\LQJSURJUDPPH



_