Dacor RGC304SNG Manual

Care and Cleaning

Cleaning the Knobs and Trim Rings (Cont.)

Insert the trim rings into the holes in the posi-

tions noted in step 4. Turn the ring until the

flame icon is in the 9 o’clock position for each

trim ring.

To replace the knobs, align the “D-shaped”

opening on the bottom of the knob with the end

of the valve shaft. Carefully push the knob on

until it stops.
Connect the cooktop power plug to the electrical

outlet.

Cleaning the Optional Griddle

Clean the griddle after each use. Wash it thoroughly

in hot soapy water to avoid stains from grease

build-up. The griddle is coated with a non-stick coat-

ing for easy cleaning. Warm water and liquid deter-

gent are all that are needed for cleaning. Remove

stubborn spots with a non-abrasive plastic mesh

pad. To prevent scratching, do not use abrasives or

abrasive cleaners. Use the soft side of a sponge to

scrub it. Dry it with a lint-free cloth.

Replacing the Grate Feet

The rubber feet on the bottom of the grate supports

can be replaced if they are lost or damaged to pre-

vent damage to the spill tray. If necessary, you may

use a pair of needle nose pliers to pull the feet free

from the grate.

Dacor Part

Number

Description

103712

Grate Support Foot (4 used per grate)

103475

12” Grate (2 used per cooktop)

103476

10” Grate (Model RGC365 Only, 1

Used per cooktop)

Flame icon in

9 o’clock

position