Fujitsu PRIMERGY TX200 S5 VFY:T2005SF020DE/B4 Data Sheet

6 GB (3 module(s) with 2 GB) DDR3, registered, ECC, 1066 MHz, PC3-8500
6 GB (3 module(s) with 2 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600
12 GB (3 module(s) with 4 GB) DDR3, registered, ECC, 1066 MHz, PC3-8500
12 GB (3 module(s) with 4 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600
24 GB (3 module(s) with 8 GB) DDR3, registered, ECC, 1066 MHz, PC3-8500
24 GB (3 module(s) with 8 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600

uSB ports

10 x uSB 2.0 (3x front uSB, 4x rear uSB 3x intern for Backup, uSSD and internal uSB)

Graphics (15-pin)

1 x VGA

Serial 1 (9-pin)

1 x serial RS-232-C (9 pin), usable for iRMC S2 or System or common use

Serial 2 (9-pin)

1 x serial RS-232-C (9 pin), optional - occupies an unused slot

LAn / Ethernet (RJ-45)

1 x Gbit/s Ethernet (Intel Hartwell)

Service LAn (RJ45)

1 x dedicated Service LAn port for iRMC (10/100 Mbit/s) 

Service LAn traffic can be switched to shared onboard Gbit LAn port

SATA Controller

ICH10R, 6-port SATA (4x for internal hard disks, 2x for accessible drives)

Trusted Platform Module (TPM)

Infineon / separate module; TCG V1.2 compliant (option)

PCI-Express Gen2 x4

2 x full height (1x long, 1x short)

PCI-Express Gen2 x8

2 x full height (1x notched, thus usable for x16 cards operating in x8 mode)

PCI-Express x4 (mech. x8)

1 x full height 

PCI slots

1 x 

Slot notes

PCI slot: 32-bit / 33 MHz, 5 V; in SAS-configurations 1x PCI-Express slot is occupied by 

the modular RAID-Controller

Hard disk bay configuration

4x 3,5-inch, for SAS / SATA or 8x 2,5-inch for SAS/SATA optional

Accessible drive bays

3 x 5.25/1.6-inch

notes accessible drives

All possible options described in relevant system configurator.

Optional hard disk bays

2 x 3.5-inch hot-plug SAS/SATA or 8x 2.5-inch hot-plug SAS in HDD box (occupies 2x 

5.25-inch bays) 

Fan configuration

2 standard fans or 2 redundant fans (only available in combination with hot plug redundant 

power supply)

Operating buttons

On/off switch

nMI button

Reset button

Status LEDs

System status (amber / yellow)

Identification (blue)

Hard disks access (green)

Power (amber / green)

At system rear side:

System status (amber / yellow)

Identification (blue)

LAn connection (green)

LAn speed (green / yellow)

Service display

Optional:

ServerView Local Service Panel (LSP)

BIOS features

ROM based setup utility

Recovery BIOS

BIOS settings save and restore

Local BIOS update from uSB device

Online update tools for main Windows and Linux versions

Local and remote update via ServerView update Manager

SMBIOS V2.4

Remote PXE boot support