Gaggenau AL400721 Brochure
152
Cooktops
C G 492 110F
Stainless steel
Width 100 cm
Liquid gas 28 – 37 mbar
Wok burner with 5 KW
Width 100 cm
Liquid gas 28 – 37 mbar
Wok burner with 5 KW
C G 492 210
Stainless steel
Width 100 cm
Natural gas 20 mbar
Wok burner with 6 KW
Width 100 cm
Natural gas 20 mbar
Wok burner with 6 KW
Necessary installation accessories
C A 429 410
C A 429 410
Frame set including decorative frame
(to be welded in) and holding frame
(to be welded in) and holding frame
Installation accessories
S V 405 022
S V 405 022
Spindle extensions up to 115 mm
S V 405 032
Spindle extensions up to 160 mm
Special accessories
W P 400 001
W P 400 001
Wok pan made of multiple-layer
material
With round bottom and handle,
ø 36 cm, 6 litres, height 10 cm.
material
With round bottom and handle,
ø 36 cm, 6 litres, height 10 cm.
Gas cooktop
C G 492
– Top appliance in the market, up to
18 kW on 5 burners
– Solid smooth-surface cast pan
supports on the same level as the
worktop
worktop
– Automatic fast ignition, electronic
flame monitoring
– Solid stainless steel control knob
Cooking zones
CG 492 110F
1 three-ring wok burner
(300 W – 5,000 W), suitable for pots up
to max. ø 32 cm.
2 two-ring high output burners
(165 W – 4,000 W), suitable for pots up
to max. ø 28 cm.
2 two-ring standard burners
(165 W – 2,000 W), suitable for pots up
to max. ø 28 cm.
1 three-ring wok burner
(300 W – 5,000 W), suitable for pots up
to max. ø 32 cm.
2 two-ring high output burners
(165 W – 4,000 W), suitable for pots up
to max. ø 28 cm.
2 two-ring standard burners
(165 W – 2,000 W), suitable for pots up
to max. ø 28 cm.
CG 492 210
1 three-ring wok burner
(300 W – 6,000 W), suitable for pots up
to max. ø 32 cm.
2 two-ring high output burners
(165 W – 4,000 W), suitable for pots up
to max. ø 28 cm.
2 two-ring standard burners
(165 W – 2,000 W), suitable for pots up
to max. ø 28 cm.
1 three-ring wok burner
(300 W – 6,000 W), suitable for pots up
to max. ø 32 cm.
2 two-ring high output burners
(165 W – 4,000 W), suitable for pots up
to max. ø 28 cm.
2 two-ring standard burners
(165 W – 2,000 W), suitable for pots up
to max. ø 28 cm.
Handling
Control knobs with cooking zone and
output level markings.
One-handed operation.
Gas valve with fine control.
output level markings.
One-handed operation.
Gas valve with fine control.
Features
Three-part pan support with flat,
continuous pot surface, on the same
level as the worktop.
Brass burner rings.
continuous pot surface, on the same
level as the worktop.
Brass burner rings.
Safety
Electronic flame monitoring with
automatic re-ignition.
Automatic fast ignition.
automatic re-ignition.
Automatic fast ignition.
Planning notes
The frame set (necessary installation
accessory)can be sent in advance to
the manufacturer of the stainless steel
or granite worktop for fitting.
Special nozzles can be ordered as
spare parts.
Plan for an electrical connection (the
appliance is not operable without
power supply).
Panel thickness 16 – 26 mm.
The drawing "Installation of the control
knob" must be observed if the panel is
more than 26 mm thick (there must be
a recess at the rear).
Minimum worktop depth 70 cm.
Control knobs can be integrated in the
lower cabinet at drawer level.
Air intake from above.
No intermediate shelf required.
Due to the separate frame welded into
the worktop, all parts remain fully
accessible.
Rear panel and wall trims must be heat-
resistant and consist of a non-flamma-
ble material.
The appliance can be fixed from above.
A minimum lateral clearance of at least
300 mm from adjacent heat-sensitive
furniture or contact surfaces must be
observed or thermal insulation fitted.
Cooktop clamping range: 40 – 50 mm.
accessory)can be sent in advance to
the manufacturer of the stainless steel
or granite worktop for fitting.
Special nozzles can be ordered as
spare parts.
Plan for an electrical connection (the
appliance is not operable without
power supply).
Panel thickness 16 – 26 mm.
The drawing "Installation of the control
knob" must be observed if the panel is
more than 26 mm thick (there must be
a recess at the rear).
Minimum worktop depth 70 cm.
Control knobs can be integrated in the
lower cabinet at drawer level.
Air intake from above.
No intermediate shelf required.
Due to the separate frame welded into
the worktop, all parts remain fully
accessible.
Rear panel and wall trims must be heat-
resistant and consist of a non-flamma-
ble material.
The appliance can be fixed from above.
A minimum lateral clearance of at least
300 mm from adjacent heat-sensitive
furniture or contact surfaces must be
observed or thermal insulation fitted.
Cooktop clamping range: 40 – 50 mm.
With a total connected load of more
than 12 kW local regulations
concerning room ventilation, room size
and combination of extraction or
recirculation hoods must be observed.
Minimum clearance between gas
cooktop(s) with more than 12 kW and
ventilation hood 70 cm.
The combination with VL 430/431 is
not recommended, since the air
extraction from the centre burner
cannot be guaranteed due to the
distance.
Appliance weight: approx. 34 kg.
than 12 kW local regulations
concerning room ventilation, room size
and combination of extraction or
recirculation hoods must be observed.
Minimum clearance between gas
cooktop(s) with more than 12 kW and
ventilation hood 70 cm.
The combination with VL 430/431 is
not recommended, since the air
extraction from the centre burner
cannot be guaranteed due to the
distance.
Appliance weight: approx. 34 kg.
Connection
Total connected load gas
17.0/18.0 kW .
Connecting cable 1.4 m with plug.
17.0/18.0 kW .
Connecting cable 1.4 m with plug.