Gaggenau AL400721 Brochure
Vario cooling appliances are fixed at
the top and bottom of the niche, on
the side opposite the hinge. There is
no fixation on the hinge side of the ap-
pliance, because the finger protection
slides in between the appliance and
the adjacent cabinetry.
The side walls of the adjacent
cabinetry have to be dimensionally
stable.
the top and bottom of the niche, on
the side opposite the hinge. There is
no fixation on the hinge side of the ap-
pliance, because the finger protection
slides in between the appliance and
the adjacent cabinetry.
The side walls of the adjacent
cabinetry have to be dimensionally
stable.
Vario cooling appliances can be
installed handle to handle as a
side-by-side solution. In this case,
the side-by-side installation kit
RA 460 000 is required.
installed handle to handle as a
side-by-side solution. In this case,
the side-by-side installation kit
RA 460 000 is required.
With all appliance combinations, the
additional heating element
RA 460 011 needs to be installed
between the appliances to avoid
condensation. This additional heat-
ing element is not necessary if the
distance between the appliances is
greater than 160 mm, or when the
appliances are installed side-by-side.
The heating element does not take up
additional space.
It is already included in the niche
dimensions and does not interfere with
the finger protection.
additional heating element
RA 460 011 needs to be installed
between the appliances to avoid
condensation. This additional heat-
ing element is not necessary if the
distance between the appliances is
greater than 160 mm, or when the
appliances are installed side-by-side.
The heating element does not take up
additional space.
It is already included in the niche
dimensions and does not interfere with
the finger protection.
If Vario cooling appliances are joined
together hinge-to-hinge, one must plan
an additional, dimensionally stable
plinth between the appliances for the
finger protection to function properly.
If usability limitations are acceptable
(opening both appliance doors simul-
taneously is not possible), appliances
can be joined directly, using the addi-
tional heating element RA 460 011.
together hinge-to-hinge, one must plan
an additional, dimensionally stable
plinth between the appliances for the
finger protection to function properly.
If usability limitations are acceptable
(opening both appliance doors simul-
taneously is not possible), appliances
can be joined directly, using the addi-
tional heating element RA 460 011.
When installing a Vario cooling
appliance from the 400 series next to
an BO/BM/BS from the ovens 400
series, a lateral distance of 60 mm is
required, if the BO/BM/BS handle is
on the same side as the Vario cooling
appliance door hinge. For the same
installation next to an BO/BM/BS from
the ovens 200 series, a distance of
40 mm is required.
appliance from the 400 series next to
an BO/BM/BS from the ovens 400
series, a lateral distance of 60 mm is
required, if the BO/BM/BS handle is
on the same side as the Vario cooling
appliance door hinge. For the same
installation next to an BO/BM/BS from
the ovens 200 series, a distance of
40 mm is required.
Installation accessories:
RA 460 000
RA 460 000
Accessory for
side-by-side installation.
side-by-side installation.
RA 460 011
Additional side heating element.
RA 460 020
Connecting element
for vertically split appliance fronts (for
a flush front).
for vertically split appliance fronts (for
a flush front).
RA 460 030
Connecting element
for vertically split fronts
(for fridge-freezer combination).
for vertically split fronts
(for fridge-freezer combination).
RA 460 040
Finger protection for
extra long furniture fronts.
extra long furniture fronts.
268
Cooling appliances
Additional planning notes for Vario cooling 400 series.