Gaggenau AL400721 Brochure

Page of 356
84
Vario cooktops
    
   C   X 480 111
 
   Stainless  steel  frame
  Width  80  cm
          Installation  accessories
    V   A 420 010
 
  Connection strip for combination with 
other Vario appliances of the 400 
series for surface installation
      V   A 420 011
 
  Connection strip for combination with 
other Vario appliances of the 400 
series for surface installation with 
appliance cover/adjustment strip
      V   A 420 000
 
  Connection strip for combination with 
other Vario appliances of the 400 
series for flush installation
      V   A 420 001
 
  Connection strip for combination with 
other Vario appliances of the 400 
series for flush installation with 
appliance cover/adjustment strip
      V   A 450 800
 
  Stainless steel adjustment strip 80 cm
   Required accessory for combination of 
several Vario appliances of the 400 
series with at least one appliance cover 
to compensate the appliance depth.
       Special  accessories
    G   N 232 110
 
  Teppan Yaki made of multi ply material,
   GN  1/1
  For full surface induction hob CX 480.
     G   N 232 230
 
  Teppan Yaki made of multi ply material,
   GN  2/3
  For full surface induction hob CX 480.
         Full  surface  induction  cooktop
  C   X 480 
 
–    One single big cooking surface
 
–   Free positioning of cookware
 
–   All sizes and formats of cookware 
can be used
 
–   TFT touch display for an intuitive 
control of all functions
 
–   Max. power output for big cookware 
of up to 4.4 kW
 
–   Precision crafting of 3 mm stainless 
steel
 
–   For surface installation with a 
visible edge or for flush installation
 
–   Can be combined perfectly with 
other Vario appliances of the 400 
series
     Cooking  zones
  One unique cooking surface of 
2,800 cm².
  Up to 4 items of cookware can be 
placed simultaneously on the cooktop.
    Handling
  Easy to use colour graphic TFT touch 
display with use indications.
  Electronic power control in 17 output 
levels.
    Features
  Booster  function.
  Individual  pot  detection.
  Cooking timer for each cooking 
position.
  Timer.
  Information key with use indications.
  Power  management.
    Safety
  Main  switch.
  Residual  heat  indicator.
  Child  lock.
  Display  cleaning  protection.
    Planning  notes
  Depending on the type of installation 
(surface-mounted or flush-mounted), 
the specific definition of the cut-out 
must be observed.
  If installing with the appliance cover 
VA 440 or adjustement strip VA 450 
take into account the additional space 
required for the depth.
  If combining several appliances with at 
least one appliance cover, the 
adjustment strip VA 450 is required to 
compensate for the depth of the 
appliance without the appliance cover.
  If combining several Vario appliances 
of the 400 series, a connection strip 
VA 420 must be placed between the 
appliances. Depending on the type of 
installation, the corresponding 
connection strip must be provided.
  In the cut-out, the installation system 
requires the side edge to be at least 
10 mm for surface installation and at 
least 13 mm for flush installation. 
Ensure a continuous cut surface of 
90°.
  The bearing capacity and stability, in 
the case of thin worktops in particular, 
must be supported using suitable 
substructures. Take into account the 
appliance weight and additional loads.
  Additional instructions for flush installa-
tion:
  Installation is possible in worktops 
made of stone, synthetics or solid 
wood. Heat resistance and watertight 
sealing of the cut edges must be 
observed. Concerning other materials 
please consult the worktop manu-
facturer.
  The groove must be continuous and 
even, so that uniform placing of the 
appliance on the gasket is ensured. 
Do not use discontinuous lining.
  The joint width may vary due to size 
tolerances of the combinations and of 
the worktop cut-out.
Please read additional planning notes 
on  page     116–123 .
  If installing several appliances in 
individual cut-outs allow for a division 
bar of minimum 50 mm between the 
individual cut-outs.
  Operates with magnetic (induction) 
iron pots and pans only. For an optimal 
heat distribution, the use of sandwich 
bottom cookware is recommended.
  The wok pan WP 400 001 cannot be 
used with this appliance.
Immersion depth depending on 
installation situation 64/67 mm.
    Intermediate  shelf  is  required.
  Appliance can be snapped into the 
worktop from above.
  Appliance weight: approx. 27 kg.
  
Please read additional planning notes 
on  page     178 .
    Connection
  Total connected load 7.2 kW.
  Connecting cable 1.5 m without plug.