Gaggenau DF280760 Owner's Manual

en-us    Troubleshooting

3

Troubleshooting

Dishwashers may occasionally exhibit problems that are 
unrelated to a malfunction of the dishwasher itself. The 
following information may help you with a dishwasher 
problem without involving a repair professional.

Note: If the appliance stops during dishwashing or does 
not start for any obvious reason, first run the cancel 
wash cycle function (Reset) . 

9

Always have repairs carried out by authorized 
technicians. If a component has to be replaced, 
always use original replacement parts.

Some faults are indicated at the top of the display 
window @ and on the front display * ): and possible 
remedies are offered (for example Filter system soiled 
(E22) -->Clean filters).

* optional feature which may or may not be included with 
your dishwasher

Error code “:‚‰ is lit.

Supply hose kinked.

Install supply hose without kinks.

Tap turned off.

Turn on the tap.

Tap jammed or calcified.

Turn on the tap.
Flow rate must be min. 10 l/min. when water 
supply is open.

Filter in the water supply blocked.

Switch off the appliance and pull out the 
mains plug. Turn off the tap. Unscrew water 
connection. 

Clean filter in the supply hose. Screw water 
connection on again. Check for leaks. 
Reconnect power supply. Switch on the 
appliance.

Error code “:‹ˆ is lit.

Intake opening (on right inside of 
appliance) covered by dishes.

Arrange dishes so that the intake opening is 
not obstructed.

Error code “:‚ƒ is lit.

Heating element calcified or soiled. Clean appliance with dishwasher cleaning 

agent or descaler. Operate the dishwasher 
with water softening system and check the 
setting. 

Error code “:ƒƒ is lit.

Filters 1Z are soiled or blocked.

Clean filters.