Elica EMD530S2 Installation Instruction

 

11 

 

 
Attention! 
If it is intended to use the hood in the recirculating 
version do not remove any duct knockouts and order 
the necessaruy charcoal filter from your supplier.

 

  

 
Remove the grease filters. 
 
Remove the 2 lateral supports and the posteior one. 

 

 

 
Rotate blower unscrewing the two fixing screws. 

 

 

 
Reinstall the posterior support.

 

 

Use the diagram or the hood as a template and mark 
the locations on the cabinet for electrical 
wiring and keyhole screw slots. 

 

 

 

Installation to wall 
• Use the diagram or the hood as a template 
and mark the locations on the wall for electrical wiring 
and keyhole screw slots.

 

 

For recessed bottom cabinet only 
If the cabinets have front, side or back trim, make 2 
wood shims the width of the trim and attach them to 
the cabinet bottom recess on both sides. 

 

 

 
Cut holes at marked locations for duct and electrical 
wiring. For the vertical duct, cut out 3/4” extra toward 
the front of the cabinet so you can move the duct 
freely when installing the hood. 
It may also ease installation by cutting the hole 10 1/2” 
instead of 10”.