Viking FDFB5303L Installation Guide
Note: This part should be
located at the center of the
grille. If desired, two per grille
can be used by dividing the
length of the grille into thirds.
located at the center of the
grille. If desired, two per grille
can be used by dividing the
length of the grille into thirds.
1/2”
(1.27 cm)
1-1/2”
(3.81 cm)
1/4” Radius
(.64 cm)
2-3/4”
(6.98 cm)
1/2”
(1.27 cm)
3/4”
(1.90 cm)
3/8”
(0.38 cm)
1/2”
(1.27 cm)
R 3/32”
(0.09 cm)
3/4”
(1.90 cm)
3/4”
(1.90 cm)
3/4”
(1.90 cm)
13/32”
(1.03 cm)
9/16”
(1.43 cm)
1/8”
(.32 cm)
Grille support
2-7/8”
(7.30 cm)
1”
(2.54 cm)
1/2”
(1.27 cm)
1/8”
(.31 cm)
1/2”
(1.27 cm)
1/4” Radius
1/
4”
Ra
diu
s
(1.2 cm)
(1.
2 c
m)
1/4” Radius
(.64 cm)
Reverse dimensions
for other end.
7/8”
(2.22 cm)
1/2”
(1.27 cm
)
2-1/8”
(5.39 cm)
3-1/8”
(7.94 cm)
3-5
/8”
(9.20 cm)
1-3/8”
(3.49 cm
)
3/8”
(.95
cm)
3/8
” Radius
3/8
” R
adiu
s
(.95 cm)
(.95
cm
)
3/8
” Radius
(.95 cm)
1/2”
(1.27 cm)
3-1/8”
(7.93 cm)
Optional hinge cover
1/2”
(1.27 cm)
3-5/8”
(9.20 cm)
3/4”
(1.90 cm)
3/4”
(1.90 cm)
3-3/4”
(9.52 cm)
3-3/4”
(9.52 cm)
3”
(7.62 cm)
3”
(7.62 cm)
3/4”
(1.90 cm)
65-1/2”
(166.37 cm)
64”
(162.56 cm)
63-15/16”
(167.48 cm)
64”
(162.56 cm)
62-3
/64”
(157.60 cm)
60-27/
32”
(154.54 cm)
4-11
/64”
(11.27 cm)
5-17
/32”
(14.04 cm)
24-27/32”
(63.10 cm)
26-3
/16”
(66.51 cm)
34-11/64”
(86.80 cm)
35-25/64”
(89.90 cm)
Custom Grille Dimensions
26
Dual 30” & 36” Custom Grille
Note: Dual units can only be made
in a left and right hand configuration.
in a left and right hand configuration.
Note: To use a custom grille on a dual
installation, you must purchase the center
trim kit FCTKSS.
installation, you must purchase the center
trim kit FCTKSS.
Note: 30” unit is on left and 36” unit is on right.
Note: Optional hinge cover can be attached using a strong VHB tape,
countersunk wood screws or short nails from a nail gun.
countersunk wood screws or short nails from a nail gun.