Viking LVDOT730SS Installation Instruction

10

Installation

•  BE SURE that support for this appliance 

is perpendicular to the front facing of the 
wall or cabinet before you perform the 
installation.

•  It is recommended to use standard 2 x 

4 support posts with a minimum of 3/4" 
(1.9 cm) solid base to support the oven.  
Support posts should be level with the fl oor 
line and well-secured to the base of the 
cabinet.  Base cabinet support must be able 
to support the oven's weight - 410 lbs. (186 
kg).

•  Use of a hydraulic lift is recommended for 

the installation of double oven units.

•  All openings in the wall behind the appliance 

or in the fl oor under the appliance should be 
sealed.

•  Keep appliance area clear and free from 

combustible materials, gasoline and other 
fl ammable vapors.

•  WARNING: DO NOT USE AN EXTENSION 

CORD WITH THIS APPLIANCE. SUCH USE 
MAY RESULT IN FIRE, ELECTRICAL SHOCK 
OR OTHER PERSONAL INJURY.

Remove wooden brace on front of pallet. 

1

Open lower oven door completely.

2

Site Preparation

Note: It is recommended that a thorough
site inspection be conducted PRIOR to
unpacking and moving this appliance.

•  WARNING: DO NOT use the handle or 

oven door to lift the oven. Remove lower 
door before installation to ensure that it is 
not used to lift the unit. DO NOT remove 
the upper door. Make sure latches are 
properly locked before removing door to 
prevent personal injury to hands and/or 
fi ngers. DO NOT lift or carry the door by 
the handle.

•  Confi rm available access to adequate 

power – see electrical requirements. 
– Double oven units require a 50 amp 

circuit.

•  It is recommended that 3/4” or larger 

material be utilized to create a support 
platform for this appliance.

• A minimum of 2" (5.1 cm) spacing above 

and below the oven trim and 2" (5.1 cm) 
spacing from side trims to any adjacent 
items or walls  is required fro ventilation 
purposes.