Bose® 738031-1310 Owner's Manual

Page of 76
10 - English
Using the System
Touch pad
The system has a touch-sensitive control pad on the front, center 
area of the top panel.
Momentarily placing your hand on the touch pad can turn the 
system on or off, snooze a sounding alarm, and reset it for the next 
day (page 16).
Note:  Pressing 
, or 
 on the remote control turns  
on the system to the selected source.
®
Reading the display
Source indicators: CD, FM, AM, or AUX 
Play mode
Clock
Alarm status
Source or system-related information
Powering on or off the system
•  Press 
 on the remote control 
or
•  Touch the touch pad.
®
 
The last source you were listening to is active.
Alternatively: 
Press any source button  
 
to activate that source.  
Note:  Selecting AUX does not turn on a device connected to AUX 
IN (such as your media player). Be sure to turn the device 
on first.
Standby mode
After 24 hours of no button presses, the system  switches to 
standby (off). If the 18-minute system standby timer (page 21) is 
enabled, the system automatically switches to standby if no audio 
is played and no buttons are pressed for 18 minutes.
If the system is connected to your network when switching to 
standby, the connection is maintained while in standby.
Controlling the volume
Press and hold 
 or
 
 to adjust the volume level.
VOLUME - 0 (silent) to 99 (loud) appears on the display to 
indicate the level.
Press to mute the system. 
Press again, or press 
 
to unmute. 
While muted, you can press
 
 to lower the volume before  
unmuting the system.
When the system is off, the volume can only be adjusted between 
10 and 75.
Setting the Sleep timer
Press 
SLEEP to set the system to shut off automatically after 
a selected period of time.
•  After pressing 
SLEEP, SLEEP - 30 MIN (or your last setting) 
 appears on the display and the sleep timer begins counting 
down. If the system is off, press 
SLEEP to turn it on and  
immediately set the sleep time. The last source selected starts 
playing as the sleep timer counts down.
•  While the 
SLEEP setting is displayed, press SLEEP again to  
set the sleep timer to 10-90 minutes (in 10-minute increments)  
or OFF. 
Note:  If more than 10 seconds elapses between button presses, 
the system automatically exits the sleep timer setup mode.
•  To review the remaining sleep time, press 
SLEEP.
•  To cancel the sleep timer, press and release 
SLEEP until  
SLEEP - OFF appears on the display.