Bose® 738031-1310 Owner's Manual

Setting and Using the Alarms

You can choose the settings for each alarm by activating the Alarm 

Setup mode and displaying the settings for the alarm you want to 

change.
1. 

Press 

Alarm Setup. 

The alarm number and time start flashing (

A) and after a 

moment, the current Alarm 1 settings are displayed (

B).

Using the Time buttons, set the alarm time.

3.  Select your wake-up source:

•  BUZZER 

 is the factory alarm setting.

•  Press 

 to choose a radio station.

•  Press 

 to choose a track.

•  Press 

 to choose a SoundTouch

™

 Preset.

Note:  When using SoundTouch

™

, you can only select a 

 Preset as a wake-up source.

Press 

Volume up or down to set the volume level of the 

selected wake-up source.

5.  Press 

 to enter the Alarm 2 setup mode.  

Repeat Steps 2-4 to set up Alarm 2.

6.  Press 

 again to exit the Alarm Setup mode.

The alarm you set is turned on and the alarm time appears on 

the display:

Alarm number and 

time

Press 

 or 

 to turn the selected alarm on or off.

When an alarm is turned on, the alarm number and time appear in 

the upper right corner of the display.

Alarm number 

and time

Touch the touch pad,

®

or press 

.

SNOOZE appears for the duration of the selected snooze time and 

then the alarm sounds again.

The snooze time is set at the factory to 10 minutes. To change the 

snooze time to 20, 30, 40, 50, or 60 minutes, see “The setup menu” 

on page 21.

Press 

.

After snoozing the alarm, place your hand on the touch pad again 

and hold it there for at least 2 seconds, or press 

.