Bose® WAVERADIOIVSL Owner's Manual

Setting and Using the Alarms

The system has two alarms, 

Alarm 1 and Alarm 2.

Each alarm can be set for:

•  Time

•  Volume

•  Wake-up source: buzzer or radio

Using the Alarm buttons on the bottom of the remote you can 

setup and operate each alarm:

Press to turn 

Alarm 1 on or off.

Press to turn 

Alarm 2 on or off.

1.  Press to activate the Alarm Setup 

mode and view Alarm 1 settings.

2.  Press again to view Alarm 2 settings.
3.  Press again to exit the Alarm Setup 

mode.

The upper right-hand corner of the display shows the alarm status 

indicators if the alarm is set.
Example with Alarm 1 and 2 set:

Alarm 1 time

Alarm 1

Alarm 2

Alarm 2 time

AM
PM

AM
PM

You can choose the settings for each alarm by activating the Alarm 

Setup mode and displaying the settings for each alarm.
To setup Alarm 1 or 2:
1.  Press ALARM SETUP 

 . 

 

The alarm number and time start flashing (

A) and after a 

 moment, the current Alarm 1 settings are displayed (

B).

Using the 

Time buttons, set the alarm time.

3.  Select your wake-up source:

•  BUZZER 

 is the factory alarm setting.

•  Press 

 to choose a radio station.

Press 

 or 

 to set the volume level of the selected 

wake-up source.

5.  Press 

 to enter the Alarm 2 setup mode.  

Repeat Steps 2-4 to set up Alarm 2.

6.  Press 

 again to exit the Alarm Setup mode.

The alarm you set is turned on and the alarm time displays:

Alarm number 

and time

Press 

 or 

 to turn the selected alarm on or off.

When an alarm is turned on, the alarm number and time appear in 

the upper right corner of the display.

Alarm number 

and time

Tap the touch pad  

®

, or press 

 on the remote.

SNOOZE is displayed for the duration of the selected snooze time 

and then the alarm sounds again.

The snooze time is set at the factory to 10 minutes. To change the 

Press 

.

After snoozing the alarm, place your hand on the touch pad again 

and hold it there for at least 2 seconds, or press 

Stop Alarm.