Bose® STOUCH520HTS Owner's Manual

24 - English

Using the System

Program the remote to control your source

If your source does not support CEC, you can program the universal remote to

control your source, such as a TV, DVD/Blu-ray Disc

™

player, cable/satellite box,

game system or DVR, by entering the code for your source’s brand. There may be

several codes for your source. You may need to perform this procedure multiple

times to locate the correct code.

Locate your source’s code

1. Power on your source.
2. Locate the code for your source’s brand in the Universal Remote Device

Codes book (provided).

Enter your source’s code

1. On the remote control, press and hold the appropriate source button until all

six source buttons glow, then release.
For example, to program your TV, press and hold

until all six source

buttons glow, then release.
The appropriate source button continues to glow.

2. On the number keypad, enter the code for your source’s brand and press + on

the volume button.

Test your source’s code

1. Test your source for basic functions. Follow the instructions for your source:

•

TV: press the channel buttons. Press

. The settings menu appears.

Press and to navigate.

•

Cable/satellite box: press

. The programming guide appears.

Press and to navigate.

•

DVD or Blu-ray Disc

™

player: press

. The settings menu appears.

Press and to navigate.

•

Game system: press and to navigate through your menu.

2. Based on your source’s response to basic functions:

•

Remote responds accurately:

press

to exit programming and save

your settings.

•

Remote does not respond or does not respond accurately:

- If your source button glows: press + on the volume button to move to

the next code. Repeat steps 1-2 in “Test your source’s code”. You may

need to repeat this procedure 30 or more times. If all six buttons blink

three times, you have cycled through all codes for your source.

- If your source button is off: your remote exited programming mode.

Repeat steps 1-2 in “Enter your source’s code” and steps 1-2 in “Test

your source’s code”.

Note: Your source may not be compatible with IR universal remote controls. Refer

to your source’s owner’s guide for more information.