Bose® STOUCH520HTS Owner's Manual

The Acoustimass module and console are paired at the factory. However, if you  

see the error message 

Cannot find Acoustimass on the display, perform this 

pairing procedure:
1.  Unplug the Acoustimass module.
2.  Press 

 on the remote control.

3.  Press   until 15 PAIR ACOUSTIMASS appears on the display.
4.  Press 

.

Plug in Acoustimass appears on the display. 

5.  Plug the AC power cord into an AC (mains) outlet.

After the Acoustimass module connects to the console, 

appears on the display.
Note: For alternate connection options due to excessive wireless  interference, 

contact customer service. 

®

Listen to the voice prompts for the following error messages:

1

The microphone on the ADAPTiQ 

headset cannot detect sound.

•  Secure all speaker cables.
•  Ensure the microphone opening on the 

top of ADAPTiQ headset is  

not blocked.

•  Your ADAPTiQ headset may be 

damaged. Call Bose

®

 customer service 

for replacement parts. Refer to the 

contact sheet in the carton.

2

The room is too loud.

Restart the ADAPTiQ audio calibration 

when the room is quiet.

3

The ADAPTiQ headset is too 

close to the speakers.

Move the ADAPTiQ headset farther away 

from the speakers.

4

The listening locations are  

too similar.

Move 1 - 2 ft. (.3 - .6 m) away from your 

previous listening location.

5

The ADAPTiQ headset cannot 

take measurements due to 

movement.

Hold your head still.

After correcting your problem, you must restart the ADAPTiQ audio calibration  

If you hear a different error message, call Bose customer service for further  

instructions. Refer to the contact sheet in the carton. 

Care and Maintenance