Bose® Lifestyle 535 Owner's Manual

System Setup

H.  Connect the speaker cable to the type of speaker you have.

Insert the plug into the speaker connector.

cube speakers:
Press the button and insert the wires. Connect 

the red-collared wire to the red connector.  

Connect the other wire to the black connector.

Notes:  
•  The rear speaker cables for Direct/Reflecting

®

 and Virtually Invisible

®

 single  

cube speakers are webbed together. You can pull them apart as needed.

•  Put the Acoustimass

®

 module in its final position:

 

– Upright (BEST) or on either side (ALTERNATE).

 

– With the front opening facing into the room.

 

– At least 18 in (45 cm) from any TV to avoid magnetic interference with the TV 

image. Move it farther away if you still notice interference.

•  Do not put electronic media, such as video or audio tapes, on or next  

to the Acoustimass

®

 module for long periods of time. The magnetic field  

surrounding the module may erase some or all of the recorded material.

•  DO NOT BLOCK the ventilation openings on the module. This can cause it 

to overheat.

I.  Congratulations! At this point you have set up the control console, the  

Acoustimass

®

 module, and the speakers. You are now ready to turn on  

your system and enter the interactive phase of the setup process using  

the UNIFY

®

 intelligent integration system. 

 

Continue with Box 

 on the next page.

Ventilation 

openings