Bose® lifestyle 535 III Owner's Manual

Care and Maintenance

1.  Press and hold the Power button   on the control console for 5 seconds 

or until the system status indicator on the control console changes to red. 

The system status indicator on the control console changes to red when the 

 system shuts down.

2.  Release the Power button   on the control console to restart the system.  

The system status indicator changes to blinking green and then solid green 

when the system is on and ready to use.

3.  If you still cannot operate the system using the remote, try the next procedure 

to pair the remote with the control console.

You may need to perform this procedure if you are replacing a remote or if  

troubleshooting instructions recommend it.
1.  Make sure your system is on. If not, press the Power button   on the  

control console.

2.  Hold the remote close to the control console.
3.  Press and hold both the Mute button   on the control console and the OK 

button on the remote at the same time for five seconds. The system status 

indicator blinks when pairing is complete.

4.  Press any remote button and verify that the system status indicator on the 

control console blinks with each button press.