LG BH6830SW Owner's Manual

31

S

ys

tem Se

tting

Each disc has a variety of audio output options. Set 
the player’s Audio options according to the type of 
audio system you use. 

Since many factors affect the type of audio 
output, see “Audio Output Specifications” on 
page 72 for details.

 

,

[PCM Stereo] (HDMI only)
Select if you connect this unit’s HDMI OUT jack 
to a device with two-channel digital stereo 
decoder. 

[PCM Multi-Ch] (HDMI only)
Select if you connect this unit’s HDMI OUT jack 
to a device with multi-channel digital decoder. 

[DTS Re-Encode] (HDMI only)
Select if you connect this unit’s HDMI OUT jack 
to a device with DTS decoder. 

[Bit Stream] (HDMI only)
Select if you connect this unit’s HDMI OUT jack 
to a device with LPCM, Dolby Digital, Dolby 
Digital Plus, Dolby TrueHD, DTS and DTS-HD 
decoder.

 

y When [Digital Output] option is set to [PCM 

Multi-Ch], the audio may output as PCM 
Stereo if the PCM Multi-Ch information is 
not detected from HDMI device with EDID.

 

y If the [Digital Output] option is set to [DTS 

Re-Encode], the DTS Re-Encode audio is 
outputted for BD-ROM discs with secondary 
audio and the original audio is outputted for 
the other discs (like [Bit Stream]).

 

y This setting is not available on the input 

signal from an external device.

 

,

This function allows you to listen to a movie at a 
lower volume without losing clarity of sound.

[Off]
Turns off this function.

[On]
Compress the dynamic range of the Dolby 
Digital, Dolby Digital Plus or Dolby TrueHD 
audio output.

[Auto]
The dynamic range of the Dolby TrueHD audio 
output is specified by itself.  
And the dynamic range of the Dolby Digital 
and Dolby Digital Plus are operated as same as 
the [On] mode.

The DRC setting can be changed only when a 
disc is not inserted or the unit is in complete 
stop mode.

 

,

When the unit is manufactured, the ID is already 
set. If interference occurs or you use a new wireless 
unit, an ID should be set again.