KitchenAid KDTE334DSS Owner's Manual

Page of 68
13
Premium Adjustable 2-Position Top Rack
After removing the culinary tool rack, you can raise or lower the top 
rack to fit tall items in either the top or bottom rack. Adjusters are 
located on each side of the top rack. Each adjuster has 2 preset 
positions. 
To raise the rack,
 
press both rack adjusters and lift the rack until it 
is in the Up position and level.
To lower the rack, 
press both rack 
adjusters and 
slide the rack to 
its Down position 
and level.
Removable Top Rack (for SatinGlide
®
 rails)
The removable top rack allows you to wash larger items such as 
pots, roasters, and cookie sheets in the bottom rack.
IMPORTANT: Remove dishes prior to removing the top rack from 
dishwasher.
To remove the rack
To gain access to the track stops, pull the upper rack forward 
about halfway out of the tub.
To open, flip the track stop toward the outside of the tub. 
After opening both track stops, pull top rack out of the rails.
Sliding Bowl Tines
Sliding lower-rack tines that 
move left or right to fit your 
dishes. You can use this 
feature to fit larger items like 
cereal bowls and others.
Removable Top Rack (for SatinGlide
®
 Max rails) 
The removable top rack 
allows you to wash 
larger items such as 
pots, roasters, and 
cookie sheets in the 
bottom rack.
IMPORTANT: Remove 
dishes prior to removing 
the top rack from the 
dishwasher.
To remove the rack:
To gain access to the 
removable tabs on the 
tracks/rails, pull the 
upper rack forward about halfway out of the tub.
On one side, press the tab on the track in and pull up the front end 
of the rack out of the track. Then repeat this step on the other side 
to completely remove the front end of the rack.   
Then remove the back end of the rack, by pulling the back end out 
with a slightly forward, and then upward motion.
To replace the rack:
Pull the tracks forward about halfway out of the tub.
Along the sides of the racks are round attachment tabs. Align the 
rack's back end attachment tabs with the cutout in the track. Push 
down into place.
Pull the tracks completely out, and align the rack's front end 
attachment tabs with the cutout in the track. Push down into place. 
You will hear a snap when the front end of the rack is secured into 
place on each side. 
Removable Culinary Tool Rack (3rd level rack)
The removable culinary tool 
rack (3rd level rack) allows 
you to wash larger items in 
the upper rack, or remove 
both the culinary tool rack 
and top rack to wash larger 
times in the lower rack. See 
“Removable Top Rack” 
section.
To remove the rack:
1. 
To access track stops, 
pull the rack forward until it stops and clicks into place.
2. To open track stops, flip the track stop to the outside of the 
track.
3. After opening both track stops, slide front wheels up and out 
of the slot in track. Continue to pull rack forward in track and 
slide the back wheels up and out of the track.
4. Close track stops.
5. Slide rack tracks back into dishwasher.
To replace the rack:
1. 
Gently pull rack tracks forward in dishwasher until they stop 
and click into place.
2. To open track stops, flip the track stop to the outside of the 
track.
3. Place the back rack rollers on each side of the rack into the 
track slot and roll the rack back into the tracks.
4. Insert front rack rollers on each side of the rack into the rack 
slots.
5. Close track stops on both sides of rack and slide rack back 
into dishwasher.
Track stop closed
Track stop open
A
B
A. Track stop
B. Track