Thunderdog TH6000BB Owner's Manual

WARNINGS
• To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

• To reduce the risk of electric shock, do not open the cabinet.  No user serviceable parts are inside.      

• Do not expose to excessive heat such as direct sunlight, fire, or other heat sources.

• Do not expose to dripping or splashing liquids.  Do not put objects filled with liquid on or near the device.

• Do not use the Power Bank in an airtight container while charging a device, doing so may cause 

damage to equipment and/or cause personal injury.

• It is normal for the Power Bank to get warm during use, however it should not become too hot to hold. 

Immediately stop using the Power Bank if you encounter burning, any discoloration or deformation of

• Immediately stop using the Power Bank if you encounter any leaking from the internal battery.  If the 

battery’s fluid makes contact with your skin, immediately seek medical attention. 

Insert the supplied USB cable (Micro-USB end) to the Mobile Power Bank’s Micro-USB port. Connect 

the other end of the cable (USB Type-A) to any DC 5V/1A source (e.g. a computer’s USB port, or a

USB wall or auto charger).
Do not force the USB Cable into the Power Bank or the Connected Charger
NOTE: During charging, each of the 4 LED Indicator Lights will either be Solid or Flashing.  

     • Solid LED = Power Bank has reached the corresponding level of charge (e.g. 2 LEDs = 50%)

     • Flashing LED = Power Bank is continuing to charge (e.g. 3 LEDs = charge is between 50-75%)

     • The Power Bank is fully charged when all 4 LED Indicator Lights are Solid.

Make sure the charging voltage of the device being charged is correct (< 5V).
Connect the device by the supplied cable. Insert the USB type-A end to the USB output port of the 

Power Bank.
NOTE: The LED Indicator Lights will light up during charging.
*All times and refill numbers are estimates and are dependent on device model and location of 

To check the Power Bank’s current charge level simply press the button on the side of the unit and

the LED Indicator Lights will turn ON.

     • 1 LED = 0-25% Charge (Power Bank will need to be Recharged very soon)

     • 2 LEDs = 25-50% Charge

     • 3 LEDs = 50-75% Charge

     • 4 LEDs = 75-100% Charge

the Power Bank or your connected device.

The charging process will sometimes take a few hours depending on how much power is left in the 

Power Bank.

To turn the Flashlight ON or OFF simply double press (press twice) the button on the side of

the Power Bank.