Amana NED4655EW-WW User Manual

Push and hold the PUSH to START knob to begin the cycle.

Select cycle settings and options by turning the knob to the 

desired position.
NOTE: Not all options and settings are available with all cycles.

Turn the END OF CYCLE SIGNAL knob to select the desired 

setting (On or Off). The End of Cycle Signal produces an 

audible sound when the drying cycle is finished. Promptly 

removing clothes at the end of the cycle reduces wrinkling.

Keep dryer area clear and free from items that would  

block the air flow for proper dryer operation. This includes 

clearing piles of laundry in front of the dryer.

To clean dryer drum
1.  Apply a liquid, nonflammable household cleaner to the 

stained area of the drum and rub with a soft cloth until 

stain is removed.

2.  Wipe drum thoroughly with a damp cloth.
3.  Tumble a load of clean cloths or towels to dry the drum.

NOTE: Garments that contain loose dyes, such as denim 

blue jeans or brightly colored cotton items, may discolor the 

dryer interior. These stains are not harmful to your dryer and 

will not stain future loads of clothes. Dry these items inside 

out to avoid drum staining.

From inside the dryer cabinet
Lint should be removed every 2 years, or more often,  

depending on dryer usage. Cleaning should be done  

by a qualified servicer.
From the exhaust vent
Lint should be removed every 2 years, or more often,  

depending on dryer usage.

Every load cleaning
The lint screen is located in the dryer. A screen blocked by 

lint can increase drying time.
To clean:

1.  Pull the lint screen out of its holder. Roll lint off the 

screen with your fingers. Do not rinse or wash screen to  

remove lint. Wet lint is hard to remove.

2.  Push the lint screen firmly back into place.