HP P1102w Owner's Manual

The following problems with media cause print-quality deviations, jamming, or damage to the product.

Poor print quality or toner adhesion

The paper is too moist, too rough, too
heavy or too smooth, or it is embossed
or from a faulty paper lot.

Try another kind of paper, between 100
and 250 Sheffield, with 4% to 6%
moisture content.

Dropouts, jamming, or curl

The paper has been stored incorrectly.

Store paper flat in its moisture-proof
wrapping.

The paper has variability from one side
to the other.

Turn the paper over.

Excessive curl

The paper is too moist, has the wrong
grain direction, or is of short-grain
construction

Use long-grain paper.

The paper varies from side-to-side.

Turn the paper over.

Jamming, damage to product

The paper has cutouts or perforations.

Use paper that is free of cutouts or
perforations.

Problems with feeding

The paper has ragged edges.

Use high-quality paper that is made for
laser printers.

The paper varies from side-to-side.

Turn the paper over.

The paper is too moist, too rough, too
heavy or too smooth, has the wrong
grain direction, or is of short-grain
construction or it is embossed or from a
faulty paper lot.

Try another kind of paper, between 100
and 250 Sheffield, 4% to 6% moisture
content.

Use long-grain paper.

Print is skewed (crooked).

The media guides might be incorrectly
adjusted.

Remove all media from the input tray,
straighten the stack, and then load the
media in the input tray again. Adjust the
media guides to the width and length of
the media that you are using and try
printing again.

More than one sheet feeds at one time.

The media tray might be overloaded.

Remove some of the media from the
tray.

The media might be wrinkled, folded, or
damaged.

Verify that the media is not wrinkled,
folded, or damaged. Try printing on
media from a new or different package.

ENWW

Solve paper-handling problems

87