GE PVB98DT-BB Specification Sheet
Listed by
Underwriters
Laboratories
PVB98DT
GE Profile
™
Series 36" Telescopic Downdraft System
Specification Revised 10/15
For answers to your Monogram, GE Profile
™
Series
or GE
®
Series appliance questions, visit our website
at geappliances.com or call GE Answer Center
®
service, 800.626.2000.
Note: Telescopic downdraft vents are not
recommended to be installed with cooktops that
are flush mounted.
Approved for use with the following GE Profile
™
,
and GE
®
Series cooktops–36" electric models,
36" gas sealed burner models and 36" induction
models.
Not Approved for use with standard burner gas
cooktops.
cooktops.
Note: The cooktop must be at least 26" deep
with a flat surface area of 23-1/2" or more, front
to back. In addition, other clearances to the
front edge of the countertop must be considered.
front edge of the countertop must be considered.
Note: Dimensions shown are for reference
only. Before cutting out countertop, refer to
instructions packed with downdraft and cooktop.
instructions packed with downdraft and cooktop.
Note: Installation on cabinets/countertops
against the wall will not be possible in most
applications. Against the wall installations are
limited to dimension requirements. Refer to
applications. Against the wall installations are
limited to dimension requirements. Refer to
installation instructions packed with product
for further details.
JXRB67 INdooR Remote AccessoRy.
Optional accessory may be ordered for installation
of motor and blower assembly in an indoor remote
location.
location.
dImeNsIoNs ANd INstAllAtIoN INfoRmAtIoN (IN INches)
VeNtINg optIoNs (IN INches)
thRough the flooR
IN cABINet dIschARge
(dowN)
(dowN)
IN cABINet dIschARge
(RIght)
(RIght)
IN cABINet dIschARge
(left)
(left)