Bose® SA-4 Owner's Manual

Appendices

orientation
 

Connector 

panel is 

facing left.

orientation
 

Connector panel  

is facing up.

Follow these instructions to wall mount your SoundTouch

™

 wireless adapter. Install 

either vertically with the connector panel facing left, or horizontally with the con-

nector panel facing up.
Note:  Mounting hardware must be purchased separately. If the mounting  

hardware instructions differ from these instructions, follow the mounting 

hardware instructions.

•  Wood Mounting: Mount to 1 in. (25.4 mm) or thicker wood. Drill hole with  

a 

⅛ in. (3.17 mm) drill. Use (2) #8x1¼ in. (32 mm) pan-head wood screws. 

•  Wallboard Mounting: Mount to 

⅜ in. (9.5 mm) or thicker wallboard. Drill 

pilot hole with a ³/

16

 in. (4.76 mm) drill. Use (2) #6-8x1 in. (25.4 mm) plastic 

wall anchors, and (2) #8x1¼ in. (32 mm) pan-head wood screws.

¼ in. (6.35 mm) 

above surface

¼ in. (6.35 mm) 

above surface

1.  Mark holes on the wall 6¼ in. (158.7 mm) center-to-center. 
2.  Drill holes. Insert anchors (if used).
3.  Install screws. Leave the screw heads ¼ in. (6.35 mm) above wall surface.
4.  Position SoundTouch

™

 wireless adapter onto screws. Press firmly into place.