GE PP932EHES Specification Sheet

PP932EH 

GE Profile

™ 

Series 30" Built-In Electric Cooktop

 

For answers to your Monogram

® 

or GE

®

 appliance 

questions, visit our website at geappliances.com  
or call GE Answer Center

®

 service, 800.626.2000.

220575

3-1/4*

Cooktop

2-1/2**

Required

28-1/2

19-5/8

29 3/4

PHP900DM

PP945WM/BM

PP944TT/DT

PP932EH/BM

PP912TM/KM/BM

JP356WM/BM

JP336DD

21-3/8

  * Depth of unit at conduit connection location (rear) 

    is 6-1/4" on models PP975/945 and 4-3/16" on 

models CP350/650, PP944/962/932/912, and 

JP656/356/336. Depth of unit at baffle (front) is 

4-5/8" on models PHP960/900.

 **Raised bull nose countertops may require up to 

3/8" additional clearance to prevent interference 

with curved front.

Electrical junction

box 16" MIN. 

below countertop

30" MIN. to

unprotected

cabinet

Cut should not interfere

with cabinet structure 

at front

1-1/2" MIN.

(30" cooktop)

2" MIN. (Induction

and 36" cooktops)

clearance to side

wall from cut-out

1-1/2" MIN.

(30" cooktop)

2" MIN. (Induction and 

36" cooktops) clearance 

to side wall from cut-out

15" MIN.  

to cabinet

1-3/4" to

rear wall

13" MAX.

depth

†

Note: Check local codes for required breaker size

Important: Requires a 5" free area between  
the bottom of the cooktop to any combustible mate-
rial, i.e., shelving. Free area not required when install-
ing wall oven underneath cooktop. Refer to instal-
lation instructions. Requires a 15" minimum from 
cooktop to adjacent overhead cabinets. Units are 
furnished with a 48" flexible armored cable. 
Note: 30" Ribbon cooktops are approved for use 
over select GE 27" and GE 30" Single Wall Ovens and 
Warming Drawers. Refer to cooktop and wall oven/
warming drawer installation instructions packed with 
product for current -dimensional data. If installed 
with a GE Profile

™ 

Telescopic Downdraft System, 

consult both the cooktop and downdraft installation 
instructions packed with product before installing. 
Cooktop gas/electric supply may need to be re-routed 
to install downdraft. Consult cabinet and countertop 
manufacturer’s specs for flush mount installation 
prior to install. 

dimensional data. 
Filler Trim Kit: When replacing an old GE 30" cooktop 
(with larger opening) use the following one-piece trim 
kit to fill in the over-size hole. Available at additional 
cost. JXTR32W (True White) JXTR32B (Black glass) 
JXTR32C (True Bisque) 

240V 8.6
208V 6.5

240V 40 Amps

†

208V 40 Amps

†

†

Note: Check local codes for 

required breaker size