Vinotemp Touch Screen Glass Door Beverage Cooler Manual

1 7 6 2 1 S o u t h S u s a n a R o a d , R a n c h o D o m i n g u e z , C a l i f o r n i a 9 0 2 2 1

i n f o @ v i n o t e m p . c o m

OPERATING INSTRUCTIONS

1. Gently place/slide the racks into the beverage cooler.
2. Determine the best temperature setting to use.

3. Place beverage containers inside the cooler.
4. Plug the power cord into a standard grounded electrical outlet.

5. Limit the frequency of opening the door to conserve energy and

maintain proper storage temperature.

6. You can turn the interior light on and off by touching the button

labeled with a light on the control panel.

Important: When using the beverage cooler for the first time, allow at
least 24 hours for the internal temperature to adjust properly. Make sure
there are at least 3 to 5 beverage containers in the unit.

TEMPERATURE CONTROL

Your beverage cooler has a touchscreen control panel located on the

upper part of the glass door.

Setting the temperature:
You can manually adjust the temperature. Simply press the down arrow

button on the control panel to decrease the temperature and the up arrow
button to increase the temperature by 1 degree increments inside the

beverage cooler. The temperature range for this unit is from 39°F (4°C)
to 65°F (18°C).

To switch the temperate display from showing Celsius and Fahrenheit,
press the C/F button.

Noted: Control Panel Lock

1. Your beverage cooler is equipped with an AUTOMATIC control panel

lock function. This function will prevent any unwanted changes to your

temperature or power settings.

2. The lock function will activate automatically 12 seconds after the last

time a button is pushed on the control panel will beep and blink that

indicates the control panel is active and the settings can be changed.

Important: In order to operate efficiently, this product should be in an

environment with an ambient temperature of less than 110°F.