Perlick 15" Signature Series Clear Ice Maker - Solid Stainless Door - Right Hinge Installation Instruction

Page of 8
Drain Pump Kit for Undercounter Clear Ice Maker
For use with H50IMS, H50IMW and H50IMS-AD Clear Ice Makers
Form No. Z2334, 08/30/2011
Check to ensure all parts are included:
Index 
No.
Description
Part No.
Qty.
1
Drain Pump Assembly
1A2015A01
1
2
Vinyl Hose (drain hose) (5/8” I.D. x 6.5”)
4A0658L03
1
3
Silicone Hose (vent hose) (3/8” I.D.×19.5”)
7730I3896
1
4
High Pressure Clear PVC Hose (discharge hose) (1/2” I.D.×9’ 4.5”)
4A5195L01
1
5
Large Clamp (drain hose/drain elbow)
4A2017-09
2
6
Small Clamp (vent hose/check valve)
4A2017-07
2
7
Hose Clips (vent hose)
4A5250-01
2
7a
Truss Head Screw (4×8, SS)
7C32-0408
2
8
Check Valve
4A5131-01
1
9
High Pressure Clear PVC Hose (discharge hose) (1/2” I.D.×7.5”)
Factory cut from item 4
1
Perlick Drain Pump
1. See the instruction manual provided with the ice maker for ice maker installation. If an instruction manual is not 
available, visit our website at www.bringperlick.com or contact Perlick Technical Support at (800)558.5592.
2. The icemaker and this kit should be installed only by qualifi ed service personnel to reduce the risk of death, electric 
shock, serious injury, or fi re. A plumbing permit and the services of a licensed plumber may be required in some 
areas.
3. THE ICE MAKER MUST BE GROUNDED: The icemaker is equipped with a 3-prong grounding plug to reduce 
the risk of potential shock hazards. It must be plugged into a properly grounded, independent wall outlet. If the 
outlet is a 2-prong outlet, it is your personal responsibility to have a qualifi ed electrician replace it with a properly 
grounded, independent 3-prong wall outlet. Do not remove the ground prong from the power cord and do not use 
an adapter plug.
4. The icemaker and this kit must be installed in accordance with applicable national, state, and local codes and 
regulations.
5. Failure to install the icemaker and this kit within these guidelines may adversely aff ect safety, performance, 
component life, and warranty coverage.
WARNING
1