VintageView Vino Pins for Wood Surfaces (with Collars) Installation Instruction
Figure D
4. Assemble the Vino Pins and Install - If using the
optional Vino Pins Collars, slide one over each of the studs
protruding from the wall with the open cavity facing the
wall surface (Figure F). If using Vino Pins extensions*,
thread a stud into one end of the base extension pin and
screw the starter base Pin onto the remaining exposed end
and firmly hand tighten (Figure G). Connect any additional
extensions in a similar fashion and repeat this process for
the neck pins. Thread the assembled Vino Pins or the
Vino Pins starter onto the studs extending from the wall,
ensuring that the base side is secured to the lower stud
and the neck pin attaches to the higher stud and firmly
hand tighten (Figure H).
3. Install the Lag Studs - Thread 2 nuts onto the fine
threaded end of one Machine/Lag Studs and using two
7/16” wrenches, tighten the nuts against one another
(Figure D). With the nuts tightend against each other, use
one wrench on the outer nut and thread the lag end into
the pilot hole in the wall. Screw the bolt into the wall
until the coarse threads of the lag screw end are no longer
visible, leaving just the finer threads exposed (Figure E).
Again using 2 wrenches, loosen the nuts and remove them
to repeat the process for the second Machine/Lag Stud.
Figure G
Figure E
Figure H
Vino Pins with
Optional Collar
Vino Pins
without Collar
Vino Pins
Starter
Vino Pins
with one
Extension
Vino Pins with
2 Extensions
*Optional
Extensions
*Optional
Collars
Figure F
For product warranty information, please visit:
VintageView.com/support/warranty
We’re here to help, call us at 866-650-1500 with any questions.
US Patents: 6,991,117 and 7,850,017 China Patent: ZL 2006 2 0173305.3
*IMPORTANT NOTICE: The Vino Pins are designed to accommodate a maximum of 3 bottles deep - 1 starter plus 2 extensions. Any
application outside of these parameters is not warranted by VintageView and may result in product and/or installation failure, property
damage and/or bodily injury.