Electrolux EI24BL10QS Owner's Manual

12

Air Filter - The control will notify you as to when it is time to replace the air filter (every 

six months). The System Status indicator will turn off and the "Air Filter" indicator will 

flash. Additionally an "ALARM RESET" indicator will be displayed below the "ON/OFF" 

keypad. No audible tone will sound. The air filter condition can be reset by momentarily 

pressing the "ON/OFF" keypad and the alarm will then display after another six months.

Vacation/Sabbath mode:
This operating mode can be used to save energy during high cost energy periods, or 

when you won't be using your appliance for an extended period of time. Vacation mode 

also serves as a Sabbath mode, disabling functions and its controls in accordance 

with the weekly Sabbath and religious holidays observed within the Orthodox Jewish 

community. When used as Sabbath mode, you may open or close the door at any 

time to access contents without concern of directly turning on or off any lights, digital 

readouts, solenoids, fans, valves, compressor, icons, tones, or alarms.

When activated, the display, alarm indicators and tones, keypad touch 

tones, interior lights, and all options are disabled. All keypad functions are 

disabled, with the exception of the "On/Off" keypad which is required to exit 

Vacation/Sabbath mode. Storage compartment temperatures are monitored 
and controlled at the settings prior to entering Vacation/Sabbath mode. 

For 

further assistance, guidelines for proper usage and a complete list of 

models with the Sabbath feature, please visit the web at http:\\www.star-k.org.

To enter Vacation/Sabbath Mode (with the control out of sleep mode), press and hold the 

"On/Off" keypad until the display goes past "OFF" and reads "VAC". The display will flash 

"VAC" three times to acknowledge your request, then will display "VAC" continuously 

until Vacation/Sabbath mode is exited. A power outage will not exit Vacation/Sabbath 

mode, exiting can only be accomplished manually. To exit Vacation/Sabbath mode and 

return to normal operation, press and hold the "On/Off" keypad until the control displays 

the temperature.

alarm reset