Philips CGA5722/05 User Manual
Configuring the Wireless ADSL Modem Routerr
9
2- Define the appropriate settings for client PC services
3- Click "OK" and then click "SAVE SETTINGS" to save your settings
3- Click "OK" and then click "SAVE SETTINGS" to save your settings
MAC filter:
The ADSL Wireless Base Station can also limit the network access
based on the MAC address. The MAC Filtering Table allows the ADSL
Wireless Base Station to enter up to 32 MAC addresses that are
allowed to access to the WAN port.
based on the MAC address. The MAC Filtering Table allows the ADSL
Wireless Base Station to enter up to 32 MAC addresses that are
allowed to access to the WAN port.
1- Click Yes to enable, or No to disable this function
2- Enter the MAC address in the space provided and click "Save
Settings" to confirm
2- Enter the MAC address in the space provided and click "Save
Settings" to confirm
URL Blocking:
The ADSL Wireless Base Station allows the user to block access to web
sites by entering either a full URL address or just a keyword. This
feature can be used to protect children from accessing violent or
pornographic web sites.
sites by entering either a full URL address or just a keyword. This
feature can be used to protect children from accessing violent or
pornographic web sites.
Schedule Rule:
You may filter Internet access for local clients based on rules. Each
access control rule may be activated at a scheduled time. Define the
time schedule on this page, and apply the rule on the Access Control
page.
access control rule may be activated at a scheduled time. Define the
time schedule on this page, and apply the rule on the Access Control
page.
Intrusion Detection:
Intrusion Detection Feature
Stateful Packet Inspection (SPI) and Anti-DoS firewall protection
(Default: Enabled) - The Intrusion Detection Feature of the ADSL
Wireless Base Station limits access for incoming traffic at the WAN
port. When the SPI feature is turned on, all incoming packets will be
blocked except for those types marked in the Stateful Packet Inspection
section.
Stateful Packet Inspection (SPI) and Anti-DoS firewall protection
(Default: Enabled) - The Intrusion Detection Feature of the ADSL
Wireless Base Station limits access for incoming traffic at the WAN
port. When the SPI feature is turned on, all incoming packets will be
blocked except for those types marked in the Stateful Packet Inspection
section.
RIP Defect (Default: Disabled) - If an RIP request packet is not
acknowledged to by the router, it will stay in the input queue and not
be released. Accumulated packets could cause the input queue to fill,
causing severe problems for all protocols. enabling this feature prevents
the packets from accumulating.
acknowledged to by the router, it will stay in the input queue and not
be released. Accumulated packets could cause the input queue to fill,
causing severe problems for all protocols. enabling this feature prevents
the packets from accumulating.