Philips DVT3000/00 User Manual

18

First steps

DVT3000 – DVT7000

Note

•  The LFH9154 Philips rechargeable batteries can be charged in 

the device. Connect the device to a computer or use an external 
charger.

•  Fully charge the rechargeable batteries before first use.
•  A complete charging cycle takes about 2.5 hours. The computer 

must be turned on when charging the batteries. If the USB port 
of the computer does not supply enough power, use an external 
battery charger.

1 

Plug the USB connector into a USB port on your computer.

2 

Insert the micro USB plug into the USB port on the bottom of the 
device.

1 

Slide the on/off switch on the side of the device downwards for 
approximately two seconds.

 

X

The device turns on and the start-up screen is displayed.

2 

To power off, pull down the power switch on the side of the device 
again and hold for about two seconds.

Note

•  The device switches itself off automatically if no key is pressed 

within a pre-set period of time 

.