Philips DVT3000/00 User Manual

27

Record

5  Record

The device offers many features that you can use during recording or 
to improve the quality of a recording. Index marks can be used to mark 
certain points in a recording as points of reference. Use the timer and 
the voice activation functions to start a recording automatically. The 
pre-recording function allows to record the last five seconds before 
you press the record key.

Set the required recording quality and microphone sensitivity or 
select automatic adjustment before you start a recording session. This 
function allows to customize the settings (recording quality, microphone 
sensitivity etc.) to suit the recording conditions 

You can also enable the wind filter function to reduce the noise 
produced by the wind if you need to make a recording outdoors 

.

When you record in environments with lots of noise in the 
background (e.g. while in a crowd or during a train or car journey), 
you can enable the noise reduction function to reduce the background 
noise 

Caution

•  Do not remove batteries or rechargeable batteries from the 

device while it is recording. If you do this, data may be damaged or 
lost. Device malfunctions may also occur.

1 

Press the 

INDEX/a key while the device is stopped to select the 

desired folder.

 

X

The following icons will be displayed, depending on the 

selected location folder: u, v, w, x, y – internal memory, à, 
á

, â, ã, ä – memory card displayed.

2 

Point the built-in microphone toward the sound source and press 
g

.

 

X

The record/play indicator lights red. The recording duration 

and the remaining recording time are displayed in the selected 
folder on the display.

3 

Check the recording level/volume.

4 

Press g to pause recording.

 

X

The record/play indicator will blink red.

5 

Press the g key to resume recording.

6 

Press the j key to stop recording.

 

X

The device returns to stop mode.