Fujitsu RX200S5 CFY:R2005SC251IN Data Sheet

Product codes
CFY:R2005SC251IN
Page of 7
Memory Modules Performance 
Mode  
6 GB (3 module(s) 2 GB) DDR3, registered, ECC, 1066 MHz, PC3-8500
6 GB (3 module(s) 2 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600
12 GB (3 module(s) 4 GB) DDR3, registered, ECC, 1066 MHz, PC3-8500
12 GB (3 module(s) 4 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600
24 GB (3 module(s) 8 GB) DDR3, registered, ECC, 1066 MHz, PC3-8500
24 GB (3 module(s) 8 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600
Interfaces
USB ports
7 x USB 2.0 (3x front, 3x rear, 1x internal)
Graphics (15-pin)
2 x VGA (1x front)
Serial connection
1 x serial RS-232-C (9-pin),  usable for iRMC or system or shared
LAn / Ethernet (RJ-45)
2 x Gbit/s Ethernet
Service LAn (RJ45)
1 x dedicated service LAn port for iRMC S2 (10/100 Mbit/s) 
Service LAn traffic can be switched to shared onboard Gbit LAn port
Onboard or integrated Controller
RAID Controller
Integrated RAID 0/1 or RAID 5/6 controller for SAS base units (occupies one PCIe slot).
See under Components RAID controller
SATA Controller
ICH10R, 4-port for RAID 0,1  (for 4x 2.5-inch HDD´s only) , 1 x SATA channel for DVD 
LAn Controller
Intel
®
 82575EB , 2 x 10/100/1000 Mbit/s Ethernet (I/O acceleration), VT-c (I/O acceleration 
and VMDq), PXE boot via LAn from PXE server, iSCSI boot (also diskless) via onboard 
LAn
Remote Management Controller
Integrated Remote Management Controller (iRMC S2, 32 MB attached memory incl. 
graphics controller), 
Trusted Platform Module (TPM)
optional TPM
Slots
PCI-Express Gen2 x4
1 x low profile 
PCI-Express Gen2 x8
2 x (1x full height or low profile, 1x low profile)
Slot notes
PCI-Express Gen2 x4, only for modular RAID controller
Drive bays
Hard disk bays
8 x 
Hard disk bay configuration
6 x 2.5-inch SAS or 8 x 2.5-inch SAS
Accessible drive bays
1 x 5.25/0.5-inch for CD/RW-DVD (only for option 6x 2.5-inch HD)
General system information
number of fans
5
Fan configuration
hot-plug redundant double fans ( 5+1 redundancy)
Operating panel
Operating buttons
On/off switch
Reset button
nMI button
Status LEDs
System status (amber / yellow)
Identification (blue)
Hard disks access (green)
Power (amber / green)
At system rear side:
System status (amber / yellow)
Identification (blue)
LAn connection (green)
LAn speed (green / yellow)
Service display
 
BIOS
BIOS features
ROM based setup utility
Recovery BIOS
BIOS settings save and restore
Local BIOS update from USB device
Online update tools for main Windows and Linux versions
Local and remote update via ServerView Update Manager
SMBIOS V2.4
Remote PXE boot support
Remote iSCSI boot support