Philips CAW7740N/05 User Manual

Configuring the Wireless Router

12

WPS can be done in any of the following ways:

-

 PIN method

- PBC method
- Manual method

Enter the PIN from the client device and click Start PIN.

Push and hold the WPS button, located on the front side on your 
router, for 3 seconds or click Start PBC

This method enables you to configure client devices without WPS 
function.

Network Address Translation allows multiple users to access the 
Internet sharing one public IP.
Check the box to enable the NAT module function.

Allows one or more public IP addresses to be shared by multiple 
internal users. This also hides the internal network for increased privacy 
and security. Enter the Public IP address you wish to share into the 
Global IP field. Enter a range of internal IPs that will share the global IP 
into the "from" field.

If you configure the Wireless Router as a virtual server, remote users 
accessing services such as web or FTP at your local site via public IP 
addresses can be automatically redirected to local servers configured 
with private IP addresses. In other words, depending on the requested 
service (TCP/UDP port number), the Wireless Router redirects the 
external service request to the appropriate server (located at another 
internal IP address).