Philips CAW7740N/05 User Manual

Getting started

6

Connect the other side of this Ethernet cable to your computer

Depending on your modem settings, you might have the following 
screen displayed

Fill in the fields using the information provided by your Internet 
Service Provider (ISP)

Then click on Continue
• A progress bar screen will be displayed, your settings will be saved and 

This screen is the Philips support site. It is a live Internet page, subject 
to change. The screen displayed may differ from the one shown.

Click on Menu if you want to go back to the menu screen

Your WiFi network is running but not secured

Click on Menu if you want to go back to the menu screen
Click on Set Encryption

At any time you can retrieve your wireless security settings using your 
installation CDROM on the computer where you installed your gateway 
and by clicking on the security icon 

 of the menu page

If you want to install a WiFi device you have to retrieve your wireless 
security settings using your installation CDROM on the computer 
where you installed your gateway and by clicking on the security icon 

 of the menu page.

3.4.1 Install a Wireless USB adapter CCU7740N
If you have bought the starter kit CKW7740N, the Wireless USB 
adapter CCU7740N is part of the box content. In that case you just 
have to insert the installation CDROM, provided with your 
CKW7740N, and follow the instructions on the screen.
You can either install your Wireless USB adapter on the same PC than 
the Wireless Router or on another PC.

Refer to the manual of the other WiFi device

If you have previously secured your network (see 3.2 step 12) through 
the easy installation, the name of your network (SSID) will be 
"PHILIPS_xxxxxx".
If not secured previously through the easy installation, the SSID will be 
"philips_install".
In case you have given another name to your network, bear in mind that  
this name will be displayed instead of the "PHILIPS_xxxxxx" or 
"philips_install".

10

11