Emerson MMI-20019043 User Manual
5.6.5
Configure Sensor Material
Display
Not available
ProLink II
ProLink
> Configuration > Sensor > Sensor Matl
ProLink III
Device Tools
> Configuration > Informational Parameters > Sensor
Field Communicator Configure > Manual Setup > Info Parameters > Sensor Information > Tube Wetted Material
Overview
Sensor Material
lets you store the type of material used for your sensor’s wetted parts in
transmitter memory. This parameter is not used in processing and is not required.
Procedure
1.
Obtain the material used for your sensor’s wetted parts from the documents
shipped with your sensor, or from a code in the sensor model number.
shipped with your sensor, or from a code in the sensor model number.
To interpret the model number, refer to the product data sheet for your sensor.
2.
Set Sensor Material to the appropriate option.
5.6.6
Configure Sensor Liner Material
Display
Not available
ProLink II
ProLink
> Configuration > Sensor > Liner Matl
ProLink III
Device Tools
> Configuration > Informational Parameters > Sensor
Field Communicator Configure > Manual Setup > Info Parameters > Sensor Information > Tube Lining
Overview
Sensor Liner Material
lets you store the type of material used for your sensor liner in
transmitter memory. This parameter is not used in processing and is not required.
Procedure
1.
Obtain your sensor’s liner material from the documents shipped with your sensor, or
from a code in the sensor model number.
from a code in the sensor model number.
To interpret the model number, refer to the product data sheet for your sensor.
2.
Set Sensor Liner Material to the appropriate option.
Configure device options and preferences
Configuration and Use Manual
97