Emerson MMI-20019043 User Manual

Set Volume Flow Type to Liquid.

4.2.2

Configure Volume Flow Measurement Unit for liquid

applications

Display

OFF-LINE MAINT

 > OFF-LINE CONFG > UNITS > VOL

ProLink II

ProLink

 > Configuration > Flow > Vol Flow Units

ProLink III

Device Tools

 > Configuration > Process Measurement > Flow

Field Communicator Configure > Manual Setup > Measurements > Flow > Volume Flow Unit

Volume Flow Measurement Unit

 specifies the unit of measurement that will be displayed for the

volume flow rate. The unit used for the volume total and volume inventory is based on this
unit.

Before you configure Volume Flow Measurement Unit, be sure that Volume Flow Type is set to
Liquid

.

Set Volume Flow Measurement Unit to the unit you want to use.

The default setting for Volume Flow Measurement Unit is l/sec (liters per second).

If the measurement unit you want to use is not available, you can define a special measurement unit.

The transmitter provides a standard set of measurement units for Volume Flow Measurement
Unit

, plus one user-defined measurement unit. Different communications tools may use

different labels for the units.

Cubic feet per second

CUFT/S

ft3/sec

ft3/sec

Cuft/s

Cubic feet per minute

CUF/MN

ft3/min

ft3/min

Cuft/min

Configure process measurement

30