Emerson MMI-20019043 User Manual

Enabled

Operators can use a single display command to acknowledge all alarms
at once.

Disabled

Operators cannot acknowledge all alarms at once, they must be ac-
knowledged individually.

Display

OFF-LINE MAINT

 > OFF-LINE CONFG > DISPLAY

ProLink II

ProLink

 > Configuration > Display > Display Options

ProLink III

Device Tools

 > Configuration > Transmitter Display > Display Security

Field Communicator Configure > Manual Setup > Display > Offline Variable Menu Features

You can control operator access to different sections of the display off-line menu. You can
also configure a password to control access.

1.

To control operator access to the maintenance section of the off-line menu, enable
or disable Off-Line Menu.

Enabled

Operator can access the maintenance section of the off-line menu. This
access is required for configuration and calibration, but is not required to
view alarms or to access Smart Meter Verification (if applicable).

Disabled

Operator cannot access the maintenance section of the off-line menu.

2.

To control operator access to the alarm menu, enable or disable Alarm Menu.

Enabled

Operator can access the alarm menu. This access is required to view and
acknowledge alarms, but is not required for Smart Meter Verification (if
applicable), configuration, or calibration.

Disabled

Operator cannot access the alarm menu.

The transmitter status LED changes color to indicate that there are active alarms, but does
not show specific alarms.

Configure device options and preferences

85