Gaggenau RB 492 User Manual

20

Note:
Risk of damage to the appliance. Do not cover ventilation 

openings in the base panel. 
Nominal dimensions to be observed:

1. Where necessary, cut the base strip to the required 

length.

2. Place base panel on the appliance (do not screw 

on).

3. Take the protective film off from the adhesive pads 

on the Velcro strip.

4. Put the base strip onto the base panel and push 

firmly.

5. Base strip can be screwed to the base panel from 

behind. There are holes in the base panel for this 

purpose.

1. Place base panel on the appliance (do not screw 

on).

2. Measure the difference in depth A between the base 

panel and the base strip of the adjacent lower 

cabinets.

3. Remove the base panel again.
4. Adjust the brackets (a) to the dimensions A and 

tighten.

5. Fasten the base panel.