Motorola MBP33P User Manual

10

Getting Started

2. During power ON, when adapter plug in, the battery icon on screen's 

top right corner will show that the battery is charging. The Blue LED 
at the top left corner light up indicates adapter is plugged in.

The Baby monitor is pre-registered to your Parent Unit. You do not need 
to register it again unless the Baby Unit loses its link with the Parent Unit.
To re-register your Baby Unit, or register a new Baby Unit, follow the 
procedure below:
1. Press the 

M

 button of the parent unit and the menu bar will pop up.

2. Press the 

<

 LEFT button or 

>

 RIGHT button until 

C

 is highlighted, 

and the 

menu will pop up. 

3. Press the 

+

 UP button or 

-

 DOWN button to select 

, and press 

the OK button to confirm. 

 / 

 / 

 / 

 will pop up, press the 

+

 UP button or 

-

 

DOWN button to select the desired CAM and press the OK button to 
start searching for a camera unit. The green audio level LED will 
flash rapidly while searching. 

5. Press the OK button to confirm.
6. Press and hold the PAIR button underneath the baby unit until the 

parent unit finds the camera, beeps and the video from the camera 
appears.

Connect a suitable AV cable into the AV OUT socket on the side of the 
Parent Unit and into the AV input of the TV. Scroll through the AV inputs 
on the TV menu until the Baby monitor picture is visible.
AV cable is an optional accessory, which is to be purchased separately.
NOTE
The Monitor's power button must be turned ON and CAM pre-selected 
before connecting the AV cable. Once the AV cable is connected, the 
Monitor's controls cannot be activated.