Sterling SSL User Manual

1.  While the hopper loader is operating, press the 

 SCROLL key 

until the screen displays the percent of Material B as 

P. nn

. 

2. Press 

the   UP key or the 

 DOWN key to change the value 

as needed. 

3.   When the percentage of Material B you want displays, press the 

 START/STOP/ SELECT/SET key to set it. 

Press the 

 SCROLL key to leave the menu unchanged. 

The screen then displays the Vacuum Timer menu. 

 

Note:  “On-the-fly” adjustments range between 1% and 99%. To set the 

percentage of Material B from 0% to 100%, stop the Series One 
Plus controller and reset proportioning while the unit is in 
Standby mode, as described in the previous section. 

 

The Series One Plus controller features a batch counter you can view during operation. The 
batch counter provides a rough approximation of total material throughput. 

Viewing the Batch Counter 
While the hopper loader is operating and while the screen displays the vacuum timer display: 

 

„

  Press the 

 SCROLL key until the screen displays the four-digit 

batch counter. 

 

The screen remains on the batch count display until you press the 

 

SCROLL key again.