VeriFone 1000SE User Manual
S
ETUP
Connect Unit to a PC/AT (optional)
12
PIN
PAD
1000SE I
NSTALLATION
G
UIDE
SE
device to an Omni 37xx
series terminal. For other terminal or controller connections, refer to the reference
manual for that controller.
manual for that controller.
Figure 3
PINpad 1000
SE
and Terminal Cable Connections
1
Disconnect power from the terminal.
2
Connect the modular plug on the cable to the modular jack on the rear of the
PINpad 1000
SE
device.
3
Connect the other end of the cable to the PlNpad port on the rear of the
terminal.
4
Reconnect power to the terminal.
Connect Unit
to a PC/AT
(optional)
If the PINpad 1000
SE
device is going to be connected to an IBM PC/AT or
compatible for general use, or the PC/AT will be running MKIXOR software for key
insertion, VeriFone sells special cable products to provide power to run the
PINpad 1000
insertion, VeriFone sells special cable products to provide power to run the
PINpad 1000
SE
(refer to
illustrates
how to connect the PINpad 1000
SE
to an IBM AT or compatible computers.
Figure 4
PINpad 1000
SE
and IBM AT Cable Connections
OMNI 37XX
PINPAD 1000SE