Philips AT810 User Manual

 

 

w

    Always clean your razor after each use.

 

w

    Always switch razor OFF, unplug and remove 

power cord before cleaning.

 

w

  Never clean, remove or replace head 

assembly while motor is on.

 

w

  Do not apply pressure to combs.  Do not 

touch razor heads with hard objects as this 

may dent or damage precision-made slotted 

combs.

 

w

    Do not use razor if combs are damaged or 

broken. Facial injury may occur. 

 

w

    Do not use compressed air, abrasives, 

scourers or aggressive liquids such as gasoline 

or acetone to clean the razor. 

 

The razor heads may be quickly cleaned after 

each use by rinsing with hot water: Water from 

the tap should be on a hot setting, BUT BE 

CAREFUL TO TEST WATER FIRST SO AS NOT 

TO BURN OR SCALD HANDS.

 

w

    Regular cleaning guarantees better shaving 

results.

 

w

  Do not immerse razor in water.

 

w

  While rinsing razor heads, water may drip 

out of the base of razor. This is a normal 

occurrence. 

 

1 

Always turn razor OFF, unplug from outlet 

and remove power cord from razor.

18

C

   Press the Razor Head Release Button to 

open the Razor Head Assembly.

C

 

  Clean inside razor heads and hair chamber 

by running under hot water. 

C

  

Clean outside of Razor Head Assembly by 

running under hot water.

 

  

Close the Razor Head Assembly and shake 

off excess water. 

Be careful not to hit the shaving unit against 

anything while shaking off excess water.

  

Open Razor Head Assembly again and 

leave open to air dry.

NOTE: Do not wipe or dry the shaving heads

with a towel or tissue. This could damage the

shaving heads.

 

w

  If you used foam or gel to shave, make sure to 

rinse all of it off to prevent residue build-up 

from clogging shaving heads.

 

w

  If the shaving unit becomes detached from the 

razor, you can easily reattach it.

 

w

  You may also clean the hair chamber without 

water by using the supplied brush.

19