Toshiba A10 User Manual

Page of 245
User’s Manual
C-3
Wireless LAN
Supported Frequency Sub-bands
Subject to the radio regulations that apply in the countries/regions, your 
Wireless LAN module may support a different set of 5 GHz/2.4 GHz 
channels. Consult your Authorized Wireless LAN or TOSHIBA Sales office 
for information about the radio regulations that apply in the 
countries/regions.
2.4GHz Band Channels Sets (Wireless IEEE 802.11 Revision b, g and 
n draft 2.0)
*1 Factory-set default channels
*2 The band width and the channel which can be used depends on the 
installed wireless LAN module. And the approved channels on using are 
different at each country or region. When using these channels in any 
country or region, refer to the addendum sheet which is Approved 
Countries/Regions for use. The channel configuration is managed as 
follows:
For wireless clients that operate in a Wireless LAN Infrastructure, the 
Wireless LAN module will automatically start operation at the channel 
identified by the Wireless LAN Access Point. When roaming between 
different access points the station can dynamically switch to another 
channel if required.
Frequency Range 
Channel ID 
2400-2483.5 MHz
1
2412
2
2417
3
2422
4
2427
5
2432
6
2437
7
2442
8
2447
9
2452
10
2457*
1
11
2462
12
2467*
2
13
2472*
2